Save As Template dialog box

To display the Save As Template dialog box select Save As Template on the File menu.

Allows you to save your label as a Template for use with the Design Wizard.

Name

Enter a descriptive name for the template. This is the name that will be shown in the Design Wizard.

Template Type

Select the type of template. This corresponds to the type of paper stock you are using your template on and allows the Design Wizard to display your template when the corresponding stock is selected.

Wizard Type

Select the Wizard Type. This tells the Design Wizard which information it should prompt for.

Reversed checkbox

Check this if you have designed the template in reversed orientation. For example, a tall business card as opposed to a wide one.